ECO-WORTHY Liber 6kP Solar Off-grid Split-phase Inverter, 6kW 48Vdc to 120Vac/240Vac, 9kW@500V PV Input

While the build arquitecture is ok for the price. The inverter lacks of com to conduct a software update or firmware to almost impossible, if you compare to the management of their batteries on this Topic. Another negative aspect is the lack of information about this new product online (video reviews)

I used to have a eg4 3000 watt inverter that was so loud now that I have the 6000 watt it is so quiet you don't even hear it running at full load

The inverter works as expected so far. Support was responsive during a lengthy delivery time.
This was purchased due to the deceptive marketing from Anker, which left me needing an additional 6k for my home loads.

Quisiera saber si la batería se puede conectar a un ecoflow, gracias

The best inverter i have ever sern in my life

Hook up inverter with 4000 watts of solar with 314 ah battery for my workshop. So far so good. Hooking up a mini split this weekend and hopefully it will run it. Very please with the purchase. Easy to install.

decent hardware, especially for the cost.... my only complaint is the access to terminal blocks; cover is screwed on with TINY screws rather than hinge and toggle latch... and terminal blocks/area is very tight making the screw blocks difficult to use because it is very hard to see insertion holes. It would be much improved with either lever-lock, or push-clamp terminal blocks with openings to the front that are visible.

I took the pre-sale offer on this 6kw inverter. Using it for an off-grid EV charger and powering miscellaneous items through 3x 48V, 100ah rack batteries. Charges my Ford Lightning with 240V at 20A. The app needs work. The idle draw is kind of high so turn it off if using it for occasional use. Happy so far.

Do you have a picture of how you wired it to your panel? Did you use a breaker or wire it straight to the panel? Thank you!

I installed this inverter powering a dedicated sub-panel in my home (home office, refrigerator, freezer, lighting, and other household loads). After configuration and several days of operation, the inverter has performed reliably and meets my expectations.

One of the strengths of this product is its documentation compared to similar inverters on the market. The manual is detailed and provides important guidance on wiring, configuration, and lithium battery settings.

However, in my opinion, this inverter is best suited for users with some technical background. Proper setup requires:

- Understanding lithium battery voltage parameters
- Correct charge current limits
- Proper wire sizing and use of ferrules
- Familiarity with grid, PV, and battery priority modes

It is not a simple “plug-and-play” device and should be installed by someone comfortable working with electrical systems.

Note:
During early morning startup, the inverter may briefly beep while the MPPT stabilizes at low solar input levels. This behavior is appears to be normal (I have had other inverters on the same platform that did the same) and resolves once PV voltage and current reach the operating threshold. While not a functional issue, this could be confusing for first-time users without prior solar experience. Once MPPT tracking locks, the inverter operates quietly and efficiently for the remainder of the day.

This 6kW split-phase inverter offers strong value for its price point. It provides solid hardware performance, split-phase output in a single unit, and good documentation. With proper configuration, it performs reliably for my residential application.

This inverter is best recommended for technically inclined users, DIY solar enthusiasts, or those working with an installer familiar with hybrid inverter systems.

Smooth inverter and super quiet. Runs a 5KW electric dryer with no problem in split phase. Terminals, PV, Load and AC inputs are easy to access. Touchscreen function is super responsive. Having a bit of trouble with App and Bluetooth/ WiFi function but work in progress.

Install was very easy and straight forward. Quick programming with the touchscreen was very impressive compared to many other installs I have done. I had this on the wall and running power in about 30 minutes or less. I have downloaded the APP and getting the inverter online was very simple. I have similar specs on my EG4 6KW but it has 2 mppt inputs. This only has 1. Not a problem at all, it works. One thing to note... The main battery cables were included and they appear to be really thick, perfect length and what should be used for this size. Very nice!
This is going to give EG4 6000XP a run for the money. For the price, excellent. I am probably going to buy another to run 12,000 watts. May even add Eco-worthy inverters to some of my other homes. I am getting good solid power on both legs hooked directly to my breaker box.

El inversor es de baja frecuencia o alta?. Cuanto pesa?