The manual says there is a windows usb driver, and there is software that uses the rs485 protocol to monitor and log performance. I can't find either. can someone help me?

@Christian Smith   Thank You your ideas  worked great!!  I am back up and viewing of the app  John

I got an ECO Worthy 60amp charge controller replacement and connected it to my existing BT-02. I have tried EVERYTHING I can think of to get it working, but it won't connect to the new controller. ...

Ok, I have now used the inverter coupled to both the controller load output and direct to the battery. In both cases the charge controller does the following: does not charge the battery beyond 1...

Hi, Are your All-In-One units high-frequency or low-frequency inverters? Wade

Thanks B, appreciate it

I just installed a 60 amp charge controller with 4 195 watt panels wired in paralell, and using 12 volt batteries. Yesterday, the controller was charging at about 28 amps and every 8 - 10 minutes o...

We're in the process of building a new home and want to add a solar system with battery back to the home. I'm trying to keep it under $5000 and to supply 240v. What else would I need to have this ...

Hi, our new MH came with a 120W panel and i wanted to increase this. Is this a simple addition or do the panels need to match?

You do not have to completely isolate the charge controller from the battery before connecting or while the inverter is running. The charge controller and inverter can be safely connected to the sa...

If you have lost the Wi-Fi connection on your inverter, you may need to reconfigure the Wi-Fi settings on the inverter so that it can connect to the new network.If you cannot reconfigure the existi...

On June 17, 2021, the President of the Republic, HE Paul Biya signed Presidential Decree no. 2021/347 setting the conditions for issuing passports. This decree lists the conditions of est...

Ok, cheers.

@Stuart Littlewood Could you tell me the order number of the monitor? You could refer to the manual to learn how to setup.

@roop fisher Hi, the inverter should be connected to battery, not the load output of the charge controller. Yes turn off the charge controller before hooking them up and putting the inverter on/und...

@Will Merwin Did you buy the 25w solar panel along with the 10A controller? What size battery do you have?

@Casey Hanner If you're fine with writing your own code, look on github for libmodbus.  If you're running Linux, you should be able to install it from packages.  The function modbus_read_...

I have just changed to Virgin media in uk . Same problem  Contact your supplier and ask them to set up a 2.4 signal for you .I did and all works fine Now 

How do you enter the parameters to my monitor 

My wife  changed internet providers to optimum  to 5 g   I lost my wifi to my 5000 inverter  inverter  any work arounds so i can motor my system?   is there ...