Hi new to this very new just bought the ECO-WORTHY 24V 880W Solar Wind Turbine Generator Kit with Inverter for Home:400W Wind Turbine Generator + 4pcs 120W Mono Solar Panel + 40A Hybrid Controller + 3000W 24V Pure Sine Wave Inverter¡ and 4
ECO-WORTHY 12.8V 200AH LiFePO4 Battery (2pcs 100AH Lithium Battery) Lithium Iron Phosphate with 3000+ Cycles and BMS Protection System for Solar Panel System,RV,Camper
I set the batterys up like this 
i then added a second wind/solar controllor with two panals and a extra wind turbine i made sure all battery was fulll useing the
ECO-WORTHY 10A 12V LiFePO4 Lithium Battery Charger Smart with LCD Screen DC Iput
made sure all out put was the same on all 4 battery connected them all up used the recommended settings
Hi
Thank you for your message
Generally as long as the fan controller is set to the battery type and 24V (8 strings), all other parameters will be generated by default without setting.
If you need to set them manually, the reference values are as follows:
Uunder 22V
Runder 25V
Rover 29.6V
Uover 30V
BCV 27.4V
Float 29.2V
Ufanbraking 29V
Here is a video:
You can check how to set controller to 24V
now my problem is on the controllors it showing 2 bars fulll 3 emtie with nothing evn plugged in yet it go up to nealy full but next day back again i not run single thing the inverter switched off all i wanted was to run this for 2 hours a day not even everydayjust to take the chill off in the morning for grand kids when they come around before school am at a loss here in what am doing wrong
