Settings Inverter and Eco Worthy Batteries

• SC

  Sam Carpenter

  4/19/24, 2:15 PM

  Hi to all,

  I've an hybrid inverter labeled "SM-3200H-24" with 6 panel Jinko 410W each, and 3 Eco Worthy Batteries 25.6V 100Ah (paralleled). I think that the current battery charging parameters are not optimal, so the batteries are not fully charged despite the daily load being just 1kW/h for only 3 hours. The inverter does not have a menu for LiFePo4 batteries but only the item called "USE" is present. I would like to know, if possible and from someone who knows the product well, what values ​​I should enter for the following items: Bulk, Float, Cut off, Back to Battery and Back to Utility. Thanks to anyone who wants to respond.

  Thanks in adv.
  
  Sam.

  0 likes 0 likes Liked Like

  ---

  5
  Posts

  475
  Views

  Reply

  ---

• DH

  Dzjon Hollenberg

  5/6/24, 6:06 PM

  @Sam Carpenter same problems, did you get an answer?

  0 likes 0 likes Liked Like

  ---

• rg

  roger grinstead

  8/16/24, 11:22 AM

  @Sam Carpenter 

  I bulk charge at 29.2 and float at 26.8. 
  battery and utility are subject to how much you want to drain your battery. I switch to utilities at 26 volts and back to battery at 27.2. This depends on if you only charge with solar or you utility charge at night. I recharge at night because my electrical rate plan is free after 8 pm. 

  0 likes 0 likes Liked Like

  ---