@Marc Satzger @Kristy Arndt Changing the Boost Charge Voltage (Option #09) from 57.6V to the 58.4V is ok. You may have a try. There's no float charging for lithium battery so no need to set the Opt...
@Marc Satzger @Kristy Arndt Changing the Boost Charge Voltage (Option #09) from 57.6V to the 58.4V is ok. You may have a try. There's no float charging for lithium battery so no need to set the Opt...
I just installed my 5000watt 48volt hybrid inverter to my off grid cabin and it is wired to my 120 breaker box. Even though battery bank is full the minute the sun is down the inverter will randoml...
This post is a little old but I am having the same issue and wondering if you figured anything out? I just set up my system and trying to figure out the proper settings but getting no where with c...
@Brad Lightner Hi, sorry looks like my coworker made a mistake when drawing this picture for you. But this drawing is not for use elsewhere, so only the 3 bolts on D rod is wrong. You may refer to ...
@Bryce Freeman This information is incorrect! If you notice, the D bracket only has three bolts and should have four. It's an older drawing and not the latest one. I dissassembled...
Thank you for the clarification. Therefore, .01v = 0.559 mph. It seems the problem is on Amazon, where it tells you who to contact for support, they show Eco-Worthy's phone number and w...
Hi, it doesn't matter where you got the product but you need to contact customer service from there. Would you mind tell me your email and Amazon order number? I will ask them to send you email. A...
@Bryce Freeman I've contacted customer service and they either don't answer the phone or emails. Does it really matter where I purchased your product? I got it at Amazon and they send y...
@Jake Taylor Hi, the 2 of 12v 50 ah batteries will not be enough for the trolling motor so I would recommend you contacting our customer service to get them replaced with bigger ones. They will tel...
@Eco Worthy I bought two of your 12v 50 ahm batteries for my 80lb trolling motor, without seeing this post. Please tell me what I need to do to correct my mistake.
this question was asked 8 months ago so i expect the person has already discovered the answers, but just in case i want to let you know i have a tracer-an solar charge contoller, thats very close t...
@Bryce Freeman This is very disappointing that you don't have a simple answer!!!!!!!!!!!!!! What's the forum for? Thank you,
Hi, you don't need two chargers but we still recommend charging the batteries one by one. If you do like you say, one of the batteries cannot be fully charged usually.
@Brad Lightner Hi, I am sorry for all the troubles...from which web did you place the order? I suggest you contact our customer service for further assistance. We got engineer who will help you sor...
@Bryce Freeman I really don't understand why this is so difficult. You say V2 is 25 m/s at what voltage setting. And shouldn't it be mph? The manual says .20v and the default says...
Hi, I've just ordered 2 x 24v 100ah batteries which will be connected in parallel for a 24v trolling motor to make 200ah of capacity. Can I use one 24v charger connected to the "+" of one battery ...
Hi, I checked with our engineer and was told the wind speed m/s=V2*25
Hello, I'll try this again. The V2 setting is at .20v, what speed does that represent? The manual says the default is .35v, what wind speed does that represent. No one is ever to...
Hi Brad, I have confirmed this issue with my coworkers. Yes the video showing the long actuator mounted on the west side is correct, while the manual and drawing is wrong. In the attached pic you w...
Hello all, I've now seen from Eco Worthy their assmbly video which shows the D bracket and the long actuator positioned on the east side and that is how I assembled mine and it's miswired. Y...